Sunlite Science & Technology has over 20 years of experience with LED lighting technology. Sunlite was founded in 1996 and began as a manufacturer of chips and wafers used to make LEDs and High-powered Lasers, giving us the technical expertise to use LED chips to its best potential. Sunlite began making its own LED products in 2005.
We have several different LED workstation lighting options for mechanics and shop owners.
ST30 Workstation Light (4700 lumens, 4FT each)
ST30 LED workstation light’s extruded aluminum housing is extremely durable, lightweight, and compact. As shown in the picture, the light was mounted to a wall using swivel endcaps to be easily adjusted to provide sufficient coverage to the entire working area. Also shown in one of the pictures is a Tool Storage Riser with a Tool Storage light.
The ST30 can also be mounted using pivot bracket. The ST30 workstation light fixtures comes with is a Class 2, low voltage driver. It may be permanently mounted and wired to the electrical system, or may be made into a power box that can be plugged into common 110-Volt wall outlets.
Pictured below are the power box that has a 6FT 110V 3-pin power cord plugged in at one end, and a on/off switch is located on the side. The output DC wires were fitted with bullet connects, which can be connected directly to the bullet connects on the ST30 light strip, or connected the 10FT cable wire and to the ST30 light strip.
Both the ST30 workstation light and the power supply have a 5-year warranty.
ST40 Workstation Lights (4inch [800 lumens] , 1FT [1900 lumens] or 2FT [2900 lumens])
The ST40 strips can be screw-mounted, magnetized on a metal worktop, or on a metal ceiling, or mounted through our swivel endcaps or metal pivots. The ST40 1FT and 2FT strips have 10-year warranty. The wall plug power supply has one-year warranty.
The ST40 Strips can be made waterproof.
ST10 Workstation Lights (20 inch, 1000 lumens)
The ST10 strip can be magnetized, or screw-mounted, or mounted through our swivel endcaps. The ST10 strip has a 10-year warranty. The wall plug power supply has one-year warranty.
The ST10 Strips can be made waterproof.
Rechargeable Workstation Light (380 lumens, Snap-on Part#: KEWLEDFLEXL)
This workstation light includes a 2600 mAh Li-ion rechargeable battery and a AC charger. The Light works without battery if charger is plugged in. It comes with the a flexible neck and detachable aluminum magnetic base that is strong enough to all the light stay vertically. The workstation light provides ~150 degree flood light.
The rechargeable Li-ion battery comes with the light uses a LG battery cell. Protection circuit was added o the battery cell to prevent overcharge and deep discharge. The AC charger comes with the light is a 4.6V/1.2A AC charger. The original battery and charger are highly recommended for this product. Please do not use any 18650 battery without protection circuit. Please do not use a charger with a voltage higher than 4.6V, or with a current higher than 1.2A.
You may replace the workstation LED head with a 12″ flexible tube and a Ealge, Turbo, or 8W LED head. The detachable aluminum magnetic base that is still strong enough to all the light stay vertically.