Sunlite Science & Technology, Inc.

4811 Quail Crest Place,  Lawrence, KS 66049

Phone (785) 832-8818
Fax:     (913) 273-1888
Warranty
Sunlite ensures a lifetime warranty for Sunlite LED Flashlights. A one year warranty for the included lithium-ion
rechargeable battery pack and the included wall charger. This warranty excludes damage due to normal wear,
abuse, improper use and maintenance, disassembly of parts, scratches to the finish, or attempted repair by
anyone other than an authorized employee of Sunlite. To obtain repair or replacements under the terms of
the warranty, please return the flashlight to the following address:  

Sunlite Science & Technology, Inc.
4811 Quail Crest Place,
Lawrence, KS 66049
Phone:        (785) 832-8818        
Fax:        (913) 273-1888
Request More Information
Please use the form below to get more information about our products.
address
Contact Us
Company History
Sunlite Science & Technology, Inc.,

4811 Quail Crest Place,
Lawrence, KS 66049

Phone (785) 832-8818     
Fax (913) 273-1888
December 2006
Sunlite became Snap-on's supplier for power LED lights
November 2005
Sunlite started to manufacture LED lighting application products
Mar 2005
Proposed the concept of AS-LED (Application-Specific Light Emitting Diode) and built the Slim LED
head based on the AS-LED concept
September 2004
Sunlite set up the fully owned assembly facility for packaging laser chips at Shanghai Suburb
September 2001
Sunlite started the manufacturing of Laser wafers and chips
November 1997
Sunlite established the LED wafers and chips manufacturing facility in Lawrence, KS
January 1997
Submitted to DOD a proposal of combining UV LED and phospher to create Monolithic full-color LED
display
January 1996
Sunlite was founded in San Jose, CA
Proprietary Technology
Universal Fitting

Our Slim, Eagle and Eagle Turbo are designed with universal fittings.














You can...

Convert a flashlight to a UV light or color lights
Insert a flexible tube or a headset attachment
Upgrade the LED head to the latest technology.
Integrated Heat Sink

Our aluminum flashlight housing also functions as a heat sink to drain the heat generated by the LED chip so that the LED light
can keep the high light output efficiency. It is normal the LED head feels hot and the flashlight housing feels warm after continuous
use. The temperature of the LED head stays the same after 20 minutes of operation. It will not burn the lens.  If you feel the light is
too hot to hold, please leave the light off for a few minutes.  
Slim True UV LED Light

Slim True UV LED Light Versus Blue LED Light for Leak Detection

The major difference:
True UV LED light :   
NEVER NEED AMBER GLASSES
Blue LED light:          HAVE TO WEAR AMBER GLASSES

Our Slim UV LED light is True UV (wavelength ~395 nm).

A lot of so called UV LED leak detection lights are actually using blue LEDs (wavelength ~460nm). If you need to
wear amber glasses to clearly see the leak, you are using a blue LED light, not a true UV LED light.

Slim True UV LED Light Versus Filtered UV Light

Our Slim UV LED light performs better on dye than a 100 W corded UV light

A filtered high power UV flashlight uses a filter to obtain UV light from a xenon bulb. Most of the light from the xenon
bulb becomes wasted. The bulb also runs hot and needs to be replaced often.  A filtered high power UV flashlight is
usually powered by a rechargeable battery to be able to run continuously for around 1 hour after each recharge. This
type of high power UV flashlight usually costs around $200.

Our Slim UV LED head can also be attached to our Eagle rechargeable flashlight, which increases the UV light’s
output power. The battery can also run continuously for around 10 hours after each recharge.  

Slim True UV LED Light Versus other UV LED Lights

Other UV LED lights use single or multiple epoxy-encapsulated UV LED lamps. Heat generated from the LED chip
becomes trapped, and the temperature of the LED chip will rise to over 125 degree C in only a few seconds. The UV
light therefore will shift to a longer wavelength of over 420 nm to become deep blue. In addition, the epoxy
encapsulation turns yellow after exposed to the UV light, the light therefore degrades over time.

Our Slim UV LED light (395 nm) uses a Power UV LED chip that is 10 times larger than regular ones. The chip is
directly alloyed onto the copper housing, so the heat generated from the chip is efficiently drained. As a result, the
temperature of the LED chip stays nearly the same as that of the LED head.   


LED Undercabinet Light
(410-550 lumens)
LED Ceiling Light
(1620-4600 lumens)
LED Underhood Light
(1620 lumens)
LED Workstation Light
(rechargeable, 350 lumens)
LED Car Light
(350 lumens)
LED Utility Light
(rechargeable, 350 lumens)

LED UV Light
UV-365 light
(for non destrustive testing & curing)
UV-395 Light
(leak detecting; fossil,scorpion detecting)

LED Penlight
Slim3W (100 lumen)
Slim1W (65 lumen)
Slim2 (60 lumen)
Slim Jr. (30 lumen)

LED Rechargeable Flashlight
Turbo Model LED Flashlight
(Dual Switches, rechargeable)
16WFP (580 lumens)
80FP (550 lumens)
12WFP (580 lumens)
8WFP (320 lumens)
Turbo (220 lumens)

Eagle Model LED Flashlight
(magnetic endcap, rechargeable)

LED CR123 Light
CR123 Flashlight
(250 lumens, strobing feature)
Turbo Jr Pistol Light
(180 lumen)

LED Tool Light, AAA version
Eagle TriA (120 lumen)

LEDs
LED head, flood light
LED head, concentrated center beam
Turbo LED
Eagle LED
Slim LED
Slim Jr. LED

Accessories
Headset Attachment, Flexible Tubes, Fixture
For all Rechargeable Lights
Batteries and Chargers
Belt Pouch
Lanyard
For Turbo Model RCHG, CR123 Lights
Tailcap,Pressue switch
Gun Mount, Pressure Button
Rubber Sleeve
For Eagle Model RCHG
Magnetic Endcap

For Slim Penlights
For Slim Jr. Penlights

Parts
Housings, Endcap, Side Switch
Turbo Model
Eagle Model
CR123 version
TriA
Slim
Slim Jr.

Other Small Parts
Products
Email Us

please include your name, email address and phone number